Lamello Biscuits & Accessories


Woodworking Tools >  Lamello Swiss Joinery >  Lamello Biscuit Jointing >  Lamello Biscuits & Accessories


Lamello Duplex Brass Hinges (10L & 10R)  (Ref: 166003)

Lamello Duplex Brass Hinges (10L & 10R)

Key Features:

-Exactly match curvature of jointer blade
-Exceptionally quick to fit
-Supplied in boxes of 20 singles (10 R/H & 10 L/H)

Handed both right hand and left hand, these curved hinges exactly match the curvature of the biscuit jointer blade. The hinges are exceptionally quick to fit and in most instances simply lay the door onto the front of the carcass and both hinge recesses can be cut in one plunge. Supplied in boxes of 20 singles (10 R/H & 10 L/H). Available in Brass or Nickel.

61.70 74.04


Quantity:  





Lamello Biscuits - Size 0 (Box 1,000)  (Ref: 340944)

Lamello Biscuits - Size 0 (Box 1,000)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

24.90 29.88


Quantity:  





Lamello Biscuits - Size 10 (Box 1,000)  (Ref: 340946)

Lamello Biscuits - Size 10 (Box 1,000)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

25.57 30.68


Quantity:  





Lamello Biscuits - Size 20 (Box 1,000)  (Ref: 340948)

Lamello Biscuits - Size 20 (Box 1,000)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

24.50 29.40


Quantity:  





Lamello Biscuits - Mixed (Box 400) (240 x 20s, 80 ea 10s & 0s)  (Ref: 610920)

Lamello Biscuits - Mixed (Box 400) (240 x 20s, 80 ea 10s & 0s)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

24.10 28.92


Quantity:  





Lamello Biscuits - Mixed (Box 1,000) (500 x 20s, 250 ea 10s & 0s)  (Ref: 600113)

Lamello Biscuits - Mixed (Box 1,000) (500 x 20s, 250 ea 10s & 0s)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

44.68 53.62


Quantity:  





Lamello Biscuits - Size 0 (Pkt 80)  (Ref: 144500)

Lamello Biscuits - Size 0 (Pkt 80)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

4.55 5.46


Quantity:  

People who bought this item also bought:
1. Lamello Biscuits - Size 20 (Pkt 80) (Ref: 144520)
2. Lamello Biscuits - Size 10 (Pkt 80) (Ref: 144510)





Lamello Biscuits - Size 10 (Pkt 80)  (Ref: 144510)

Lamello Biscuits - Size 10 (Pkt 80)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

4.55 5.46


Quantity:  

People who bought this item also bought:
1. Lamello Biscuits - Size 20 (Pkt 80) (Ref: 144520)
2. Lamello Biscuits - Size 0 (Pkt 80) (Ref: 144500)





Lamello Biscuits - Size 20 (Pkt 80)  (Ref: 144520)

Lamello Biscuits - Size 20 (Pkt 80)

Key Features:

-Compressed precision beech biscuits
-Hold tolerance so are never too loose or too tight
-Can be planed leaving a clean solid timber finish
-Expand when immersed in glue
-Available in boxes of 1,000

Lamello precision biscuits are made from pressed solid beech to a very high standard and hold their tolerance. The biscuits are slightly compressed in manufacturing, so that on contact with the glue they expand tightly into the joint. Standard sizes are: No. 0 - 47 x 15 x 4mm, No. 10 - 53 x 19 x 4mm and No. 20 - 56 x 23 x 4mm.

4.55 5.46


Quantity:  

People who bought this item also bought:
1. Lamello Biscuits - Size 10 (Pkt 80) (Ref: 144510)
2. Lamello Biscuits - Size 0 (Pkt 80) (Ref: 144500)





Lamello Clamping Plates (Box of 250)  (Ref: 600112)

Lamello Clamping Plates (Box of 250)

Key Features:

-Red plastic biscuit for dry assembly
-Barbs moulded onto surface ensure a secure fit
-Standard No. 20 biscuit slot

A very clever red plastic biscuit with barbs moulded onto the surface. They are used in standard No. 20 biscuit slots for dry assembly of joints as a fitting aid for giving workpieces which are difficult to clamp. Used in conjunction with wooden Lamello biscuits, the barbs ensure a secure fit for the plates in the joint.

54.18 65.02


Quantity:  





Lamello H9 Biscuits (Box of 250)  (Ref: 202275)

Lamello H9 Biscuits (Box of 250)

Key Features:

-H9 size biscuits - 38 x 12 x 3mm

H9 are smaller than normal biscuits, 38 x 12mm and thinner at only 3mm. They require a 78mm diameter cutter.

12.86 15.43


Quantity:  





H9 Cutter 78 x 3 x 22mm Z4  (Ref: 132009)

H9 Cutter 78 x 3 x 22mm Z4

Key Features:

-H9 size biscuits - 38 x 12 x 3mm

H9 are smaller than normal biscuits, 38 x 12mm and thinner at only 3mm. They require a 78mm diameter cutter.

87.03 104.44


Quantity:  





Clear Plate C20 (250)  (Ref: 510271)

Clear Plate C20 (250)

Key Features:

-Alignment plate for joining material, such as Corian®, Varicor® etc.
-Made of translucent plastic
-Size 60 x 23 x 4 mm

Special alignment plates made for joining composite manmade materials, such as Corian® or Varicor® etc. They are made from translucent plastic, size 60 x 23 x 4mm, equivalent to a No.20 biscuit.

35.57 42.68


Quantity:  





Lamello Biscuit Jointer Blade - 100 x 4 x 22mm  (Ref: 132000)

Lamello Biscuit Jointer Blade - 100 x 4 x 22mm

Key Features:

-Tungsten tipped
-Cuts 4mm slot
-100mm x 22mm bore
-For Lamello jointers and many other makes

This Lamello tungsten tipped blade is a top of the range industrial quality blade for trade or professional use. Cuts 4mm slot for biscuits and other connectors. Diameter 100mm bore 22mm. (Fits Lamello; Classic C3, TOP20/21 and Zeta as well as many other makes of biscuit jointer)

70.06 84.07


Quantity:  





Lamello Clamex Covercaps - Beech (Pkt 100)  (Ref: 210581)

Lamello Clamex Covercaps - Beech (Pkt 100)

Key Features:

-Simple push fit covers
-Locate in the 6mm hole for the locking mechanism
-Available in packs of 100
-5 colours: white, pine, beech and brown

Simple push fit covers to help hide the 6mm hole that allows access the Clamex locking mechanism. Available in packs of 100 and a choice of 5 colours: white, pine, beech and brown.

5.50 6.60


Quantity:  





Lamello Clamex Covercaps - Brown (Pkt 100)  (Ref: 210580)

Lamello Clamex Covercaps - Brown (Pkt 100)

Key Features:

-Simple push fit covers
-Locate in the 6mm hole for the locking mechanism
-Available in packs of 100
-5 colours: white, pine, beech and brown

Simple push fit covers to help hide the 6mm hole that allows access the Clamex locking mechanism. Available in packs of 100 and a choice of 5 colours: white, pine, beech and brown.

5.50 6.60


Quantity:  





Lamello Clamex Covercaps - Pine (Pkt 100)  (Ref: 210582)

Lamello Clamex Covercaps - Pine (Pkt 100)

Key Features:

-Simple push fit covers
-Locate in the 6mm hole for the locking mechanism
-Available in packs of 100
-5 colours: white, pine, beech and brown

Simple push fit covers to help hide the 6mm hole that allows access the Clamex locking mechanism. Available in packs of 100 and a choice of 5 colours: white, pine, beech and brown.

5.50 6.60


Quantity:  





Lamello Clamex Covercaps - White (Pkt 100)  (Ref: 210578)

Lamello Clamex Covercaps - White (Pkt 100)

Key Features:

-Simple push fit covers
-Locate in the 6mm hole for the locking mechanism
-Available in packs of 100
-5 colours: white, pine, beech and brown

Simple push fit covers to help hide the 6mm hole that allows access the Clamex locking mechanism. Available in packs of 100 and a choice of 5 colours: white, pine, beech and brown.

5.50 6.60


Quantity:  





Lamello Duplex Nickel Plated Hinges  (Ref: 100905)

Lamello Duplex Nickel Plated Hinges

Key Features:

-2 piece detachable hinges
-Exactly match curvature of jointer blade
-Exceptionally quick to fit
-Supplied in boxes of 20 singles (10 R/H & 10 L/H)
-Solid Brass or Nickel plated hinges available

Handed both right hand and left hand these curved 2 piece detachable hinges fit exactly match the curvature of the jointer blade. With the construction of a simple jig, placement of hinges need take only seconds. The hinges are exceptionally quick to fit. Solid Brass or Nickel plated hinges available. Hinge size 70 x 35 x 1.5mm. Supplied in boxes of 20 singles (10 Right hand & 10 Left hand)

43.50 52.20


Quantity:  





Lamello Fast Clip In Biscuit Connector (Pkt 50)  (Ref: 211263)

Lamello Fast Clip In Biscuit Connector (Pkt 50)

Key Features:

-Concealed fast clip in biscuit connector
-Makes a detachable joint if required for boxing pipes etc
-Fast and quick to use
-Slide into biscuit slot and tap joint together
-No need to clamp
-Supplied in packs 50 pairs with installation tool

Simple to use this plastic biscuit simply clips together and can be used as a concealed connector, suitable for example, when boxing in pipe covers, as it can be detached. Connector has self cutting edges so all that is needed is to tap connector into biscuit slots and push joint together. Most suitable for soft wood and some wood composites. Supplied in packs of 50 pairs of connectors, installation tool and a clip for cutting depth.

38.35 46.02


Quantity:  





Lamello Drill jig and HW-Reversing blades cutter  (Ref: 702311)

Lamello Drill jig and HW-Reversing blades cutter

Key Features:

-Two part kit containing the special cutter and drilling jig
-Allows you to cut and fit Lamello Clamex S system connectors
-Use with almost any biscuit jointer
-Clamex S will overcome many design problems
-Almost invisible clamping connector, also detachable
-Visible sign on the finished joint, a single 6mm hole
-Clamex blade is 100mm x 8mm with a 22mm bore
-Drill jig and bit and depth stop for 6mm hole joint angles 35° - 90°

This is a two part kit containing the special cutter and drilling jig to allow you to cut and fit the very clever Lamello Clamex S system connectors on your standard biscuit jointer. The Clamex S will overcome so many design problems as it is a clamping connector that can be dismounted at any time with the only visible sign on the finished joint being a single 6mm hole. The special Clamex blade is 100mm x 8mm with a 22mm bore. The drill jig is supplied with drill bit and depth stop and accurately positions the 6mm locking point and will drill joint angles 35° - 90°.

186.80 224.16


Quantity:  





Lamello 2mm Slip On Plate  (Ref: 702313)

Lamello 2mm Slip On Plate

Key Features:

-Fits to tilting fence on biscuit jointers
-Will fit: Top 20 S2/S3/S4, Top 20S, Experta/Classic C3 and Classic C2

Aluminium plate 2mm thick that fits onto tilting fence on biscuit jointers. Will fit Top 20 S2/S3/S4, Top 20S, Experta/Classic C3, C2 and X. It replaces the standard red 4mm thick plastic plate when working with 16mm board.

20.94 25.13


Quantity:  





Lamello Clamex P Drill Jig and Drill Bit  (Ref: 702329)

Lamello Clamex P Drill Jig and Drill Bit

Key Features:

-Drill jig for angles 30° - 150°
-Drill bit and depth collar supplied

Drill jig for drilling the 6mm hole for the Lamello Clamex joint. Use for angles 30° - 150°, supplied complete with drill bit and depth collar.

78.34 94.01


Quantity:  





Lamello S6 Large Biscuit (Box 40)  (Ref: 202274)

Lamello S6 Large Biscuit (Box 40)

Key Features:

-Largest wooden biscuit in Lamello range
-Overall size 85 x 30 x 4mm
-Compressed precision beech biscuits for larger jointing
-Hold their tolerance, for a precise fit everytime
-Planeable leaving a clean timber finish
-Expand when immersed in glue to give a tight fit
-Supplied in packs of 40 or 1,000

The largest Lamello biscuit is the S6, 85mm in length and 30m in width. Having the same thickness as the 0, 10 and 20 biscuits of 4mm, this larger biscuit will give greater strength for larger items. Sold in packs of 40 or 1,000.

4.55 5.46


Quantity:  





Lamello S6 Large Biscuit (Box 1,000)  (Ref: 202276)

Lamello S6 Large Biscuit (Box 1,000)

Key Features:

-Largest wooden biscuit in Lamello range
-Overall size 85 x 30 x 4mm
-Compressed precision beech biscuits for larger jointing
-Hold their tolerance, for a precise fit everytime
-Planeable leaving a clean timber finish
-Expand when immersed in glue to give a tight fit
-Supplied in packs of 40 or 1,000

The largest Lamello biscuit is the S6, 85mm in length and 30m in width. Having the same thickness as the 0, 10 and 20 biscuits of 4mm, this larger biscuit will give greater strength for larger items. Sold in packs of 40 or 1,000.

55.02 66.02


Quantity:  





Lamello Champ Slide Biscuit Connector  (Ref: 211261)

Lamello Champ Slide Biscuit Connector

Key Features:

-Concealed self clamping biscuit connector
-Slide joint together to provide a secure fixing
-No need to clamp joint in place
-Suitable for mitres and corners
-Supplied in packs 50 pairs with installation template

This 'Champ' biscuit can be used as a concealed self clamping connector. It will help with the assembly of mitres, corners and other various joints without the need for clamps. For thin material from 14mm in wood and wood composites. Supplied in packs of 50 pairs with installation template.

39.14 46.97


Quantity:  





Lamello Metal Sliding biscuit connector (40)  (Ref: 211262)

Lamello Metal Sliding biscuit connector (40)

Key Features:

-Concealed heavy duty sliding biscuit connector
-Slide joint together to provide a secure fixing
-Detachable if required for boxing pipes etc
-No need to clamp joint in place
-Supplied in packs 40 pairs with screws

This heavy duty metal biscuit can be used as a concealed self clamping connector, for detachable construction such as pipe covers. Clamps are not required as the joint is slid into place and held with the metal lugs. An integral stop can block one side if required. Screwed into place, the biscuit has an adjustable joint pressure. For material from 18mm in wood and wood composites, supplied in packs of 40 pairs connectors, 83 screws of each size 3 x 13mm and 3 x 25mm and a clip for cutting depth.

59.32 71.18


Quantity:  





Lamello Clamex S-18 Kit (18 Pairs, Jig, key & 75 screws)  (Ref: 211284)

Lamello Clamex S-18 Kit (18 Pairs, Jig, key & 75 screws)

Lamello Clamex S-18 Kit for Lamello Clamex S Connectors

28.46 34.15


Quantity:  





Spax Pozi Pan Head Woodscrews 3 x 16mm (Box 200)  (Ref: 210568)

Spax Pozi Pan Head Woodscrews 3 x 16mm (Box 200)

Spax Pozi Pan Head Woodscrews for Lamello Clamex S Connectors

2.37 2.84


Quantity:  





Lamello Clamex S-18 Kit with Metal Latch 80 Pairs  (Ref: 211285)

Lamello Clamex S-18 Kit with Metal Latch 80 Pairs

Key Features:

-Clamex - the innovative biscuit-shaped connector from Lamello
-Aligns and connects, 2 functions in one
-Maximum aesthetics due to minimal hole size for opening and closing of the connection
-No torsional movement due to aligning pins
-Many angles possible
-Stackable, since no parts protruding from the surface
-Easy installation with any Lamello biscuit joiner
-Usable in solid wood and wood composites
-Tolerance lateral ± 0,5 mm (max.± 0,75 mm)
-Made of fibre-glass reinforced plastic
-Knock down furniture connectors

Aligning, connecting and detachable the Clamex connector is very clever, no need for glue and only a small 6mm hole visible on the whole joint the Clamex system is a great way to joint. Cabinet makers, joiners, carpenters, interior fitters, shop and exhibition fitters and people in the furniture industry would all benefit from using Clamex. These are repeatable, detachable connections without noticeable wear. When on site there is minimal assembly time with full prefabrication possible. It is stackable with no protruding parts on the surface and is easy and efficient to install. There are no additional positioning parts such as dowels or tongues required. Tolerance lateral ± 0,5 mm (max.± 0,75 mm) No torsional movement due to aligning studs.Made of fibre-glass reinforced plastic with a zinc die-cast alloy lever. Size 66 x 29 x 9mm. Groove can be cut with your biscuit jointer fitted with the Clamex HW blade. Available in packs of 18 or 80 pairs.

107.63 129.16


Quantity:  





Lamello Clamex P-15 Connectors Pack 80  (Ref: 950817)

Lamello Clamex P-15 Connectors Pack 80

Key Features:

-Unique fitting to overcome many design problems
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special ‘T’ slot needs to be cut by Lamello Zeta biscuit jointer
-Joint angles 30 - 180°
-Made from fibre glass reinforced plastic for strength
-Suitable for solid wood, composite boards & other sheet materials

This is a truly amazing connector with a host of uses. Lamello have overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. The Clamex P is a biscuit shaped fitting with a ‘T’ profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the ‘T’ to the bottom using a unique vertical mechanical drive. Made from fibre glass reinforced plastic for strength (Tensile strength 160kg). Overall length is 66mm x width 29mm , each half has a depth of 14.5mm, it is 7mm in width (9.7mm o/a with ‘T’). Supplied as a pack of 80 or 300.

98.91 118.69


Quantity:  





Lamello Clamex P-15 Connectors Pack 300  (Ref: 950818)

Lamello Clamex P-15 Connectors Pack 300

Key Features:

-Unique fitting to overcome many design problems
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special ‘T’ slot needs to be cut by Lamello Zeta biscuit jointer
-Joint angles 30 - 180°
-Made from fibre glass reinforced plastic for strength
-Suitable for solid wood, composite boards & other sheet materials

This is a truly amazing connector with a host of uses. Lamello have overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. The Clamex P is a biscuit shaped fitting with a ‘T’ profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the ‘T’ to the bottom using a unique vertical mechanical drive. Made from fibre glass reinforced plastic for strength (Tensile strength 160kg). Overall length is 66mm x width 29mm , each half has a depth of 14.5mm, it is 7mm in width (9.7mm o/a with ‘T’). Supplied as a pack of 80 or 300.

340.37 408.44


Quantity:  





Lamello Bisco Biscuit Pack 80  (Ref: 950870)

Lamello Bisco Biscuit Pack 80

Key Features:

-Plastic aligning and/or connecting biscuit
-7mm thickness
-Overall size 65 x 27 x 7mm

The Bisco can be used as an aligning or jointing biscuit, designed to work with the Clamex P Zeta connectors, it is 7mm in thickness fitting the slot produced by the Zeta biscuit jointer. This plastic biscuit is 65mm in length x 27mm wide and 7mm thick and can be glued in place if required.

18.16 21.79


Quantity:  





Lamello Bisco Biscuit Pack 300  (Ref: 950871)

Lamello Bisco Biscuit Pack 300

Key Features:

-Plastic aligning and/or connecting biscuit
-7mm thickness
-Overall size 65 x 27 x 7mm

The Bisco can be used as an aligning or jointing biscuit, designed to work with the Clamex P Zeta connectors, it is 7mm in thickness fitting the slot produced by the Zeta biscuit jointer. This plastic biscuit is 65mm in length x 27mm wide and 7mm thick and can be glued in place if required.

55.37 66.44


Quantity:  





Lamello Self Clamping Biscuit (Pkt 80)  (Ref: 701334)

Lamello Self Clamping Biscuit (Pkt 80)

Key Features:

-Self clamping insert
-Pulls together and holds the timber components while the glue cures
-Made from glass fibre reinforced plastic
-Measures 27 x 23 x 4mm
-Suitable for timber thicker than 35mm
-Pack of 80

Lamello have produced yet another innovative approach to the glued joint. This is a self clamping insert which pulls together and holds the timber components while the glue cures. Using the same configuration as the number 20 biscuit the insertion slot is produced with your biscuit jointer. The biscuit / insert is made from glass fibre reinforced plastic for rigidity and durability and is hammered home dry. The specially shaped barbed ridge creates the clamping action and locks the components together to form a mitre, 'T' and butt joint. The E20H measures 27 x 23 x 4mm and is suitable for timber deeper than 35mm. Supplied in a pack of 80.

24.89 29.87


Quantity:  





Lamello Self Clamping Biscuit E20L (Pkt 80)  (Ref: 701335)

Lamello Self Clamping Biscuit E20L (Pkt 80)

Key Features:

-Self clamping insert
-Pulls together and holds the timber components while the glue cures
-Made from glass fibre reinforced plastic
-Measures 56 x 11.5 x 4mm
-Suitable for material in excess of 50mm wide
-Pack of 80

Lamello have produced yet another innovative approach to the glued joint. This is a self clamping insert which pulls together and holds the timber components while the glue cures. Using the same configuration as the number 20 biscuit the insertion slot is produced with your biscuit jointer. The biscuit / insert is made from glass fibre reinforced plastic for rigidity and durability and is hammered home dry. The specially shaped barbed ridge creates the clamping action and locks the components together to form a mitre, 'T' and butt joint. The E20L measures 56 x 11.5 x 4mm and is suitable for material in excess of 50mm wide. Supplied in a pack of 80.

24.89 29.87


Quantity:  





Size 2 Cutter for Mini Spot Patches  (Ref: 132217)

Size 2 Cutter for Mini Spot Patches

Key Features:

-Patch repair such things as sap pockets and splits easily
-Timber patches when matched leave an almost invisible repair
-Patch pocket cutting blade fit to biscuit jointers
-Cuts pocket of maximum size 65mm length, 8mm wide and 13mm deep
-Tungsten tipped 4 tooth precision blade,100mm diameter with 22mm bore
-Patches available in packs of 50, Pine, Oak or Mahogany
-Patch and cutter are matched for precise fit

Allowing for almost invisible repairs, this blade will fit biscuit jointers and allow you to patch repair such things as sap pockets and splits. Cutting a special tapered slot with a maximum length of 65mm x 8mm wide that tapers and 13mm deep. You then insert a Lamello patch and plane/sand flush. Less plunge depth of the blade will result in a shorter repair. The 100mm disc has 4 tungsten carbide industrial cutting teeth, its anti-kick back design ensures safety and its balance and design cleanly cuts. The disc has a 22mm bore. Patches are available in either Pine, Oak or Mahogany.

47.78 57.34


Quantity:  





Lamello Clamex Pro Kit  (Ref: 718713)

Lamello Clamex Pro Kit

Key Features:

-Kit for biscuit jointers for Clamex S jointing and fitting
-Clamex aligns and connects at the same time
-Detachable if required, invaluable for certain projects
-Single 6mm hole on outside of joint is all that is viable

Contains:

-Jointing blade HW with reversing blades
-18 pairs Clamex, drilling jig for 35° - 90° with drill bit
-Marking jig, 1 hex key and 75 screws

Aligning, connecting and detachable the Clamex connector is very clever, no need for glue and only a small 6mm hole visible on the whole joint the Clamex system is a great way to joint. Cabinet makers, joiners, carpenters, interior fitters, shop and exhibition fitters and people in the furniture industry would all benefit from using Clamex. These are repeatable, detachable connections without noticeable wear. When on site there is minimal assembly time with full prefabrication possible. It is stackable with no protruding parts on the surface and is easy and efficient to install. There are no additional positioning parts such as dowels or tongues required. No torsional movement due to aligning studs. Groove can be cut with your biscuit jointer fitted with the Clamex HW blade.This kit contains everything you need for your biscuit jointer as well as jigs and a starter pack of Clamex connectors to make the unique Lamello Clamex S joints. The Clamex jointing element is made up of two halves and aligns and connects at the same time, it can be detached if required so is invaluable for certain projects. All that shows on the assembled joint is a single 6mm hole to allow the hex key to lock and unlock the joint. The kit contains: Jointing blade HW with reversing blades (100mm x 8mm x 22mm bore) 18 pairs Clamex, drilling jig for 35° - 90° with drill bit, marking jig, 1 hex key and 75 screws

204.45 245.34


Quantity:  





Blade For Lamello Zeta Jointer  (Ref: 952761)

Blade For Lamello Zeta Jointer

Key Features:

-Tungsten carbide tipped groove cutter
-100mm x 7mm
-22mm bore

Blade for the Lamello Zeta jointer, tungsten carbide tipped groove cutter, 100mm x 7mm x 22mm bore.

91.00 109.20


Quantity:  





Lamello Clamex P Medius Connector Pack 80  (Ref: 502891)

Lamello Clamex P Medius Connector Pack 80

Key Features:

-Unique fitting to overcome many design problems
-Medius centre panel connector, 2 connectors will work back to back
-Minimum 16mm thick central panel (30mm max)
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special 'T' slot needs to be cut by Lamello Zeta biscuit jointer
-Joint angles 30 - 180 Suitable for solid wood, composite boards & other sheet materials

This special connector is for the Lamello Zeta jointer. The Medius is a centre panel connector, allowing you to put them back to back in a board with a minimum thickness of 16mm (max 30mm). The Zeta and Clamex P system allows you to overcome so many jointing problems, forming a strong almost invisible joint that requires no clamping and is also detachable. This is a truly amazing connector with a host of uses. The Medius is a 2 piece biscuit shaped fitting with a 'T' profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the 'T' to the bottom using a unique vertical mechanical drive. Overall length is 66mm, one half has a depth of 14.5mm, the other 8mm, it is 7mm in width (10mm o/a with 'T'). Supplied as a pack of 80 or 300.

98.12 117.74


Quantity:  





Lamello Clamex P Medius Connector Pack 300  (Ref: 502892)

Lamello Clamex P Medius Connector Pack 300

Key Features:

-Unique fitting to overcome many design problems
-Medius centre panel connector, 2 connectors will work back to back
-Minimum 16mm thick central panel (30mm max)
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special 'T' slot needs to be cut by Lamello Zeta biscuit jointer
-Joint angles 30 - 180 Suitable for solid wood, composite boards & other sheet materials

This special connector is for the Lamello Zeta jointer. The Medius is a centre panel connector, allowing you to put them back to back in a board with a minimum thickness of 16mm (max 30mm). The Zeta and Clamex P system allows you to overcome so many jointing problems, forming a strong almost invisible joint that requires no clamping and is also detachable. This is a truly amazing connector with a host of uses. The Medius is a 2 piece biscuit shaped fitting with a 'T' profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the 'T' to the bottom using a unique vertical mechanical drive. Overall length is 66mm, one half has a depth of 14.5mm, the other 8mm, it is 7mm in width (10mm o/a with 'T'). Supplied as a pack of 80 or 300.

387.00 464.40


Quantity:  





Lamello P-15-G Zeta Connectors Pack 1,000  (Ref: 503648)

Lamello P-15-G Zeta Connectors Pack 1,000

Key Features:

-Unique fitting to overcome many design problems
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special 'T' slot needs to be cut by Lamello Zeta biscuit jointer
-Joint angles 30 - 180°
-Suitable for solid wood, composite boards and other sheet materials
-P-15-G is the lighter duty version of the P15 connector
-Pack of 1,000

The Clamex P-15-G is a lighter duty version with slightly less tensile strength as the well known P-15 connector, still a truly amazing connector with a host of uses. Use to overcome many design assembly problems, this clamping connector is almost invisible, requires no additional clamping of the joint and has the option to disconnect if required after assembly.Designed especially to fit the cut produced by the Lamello Zeta biscuit jointer (with its unique vertical mechanical movement), it is also suitable for joints cut with a CNC machine. the P-15-G biscuit shaped fitting has a 'T' profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key through the 6mm hole, locking the fitting together to form a very secure joint (6mm hole is the only visible sign of jointing method). Overall length is 66mm, each half has a depth of 14.5mm, it is 7mm in width (10mm o/a with 'T'). Supplied as a box 1,000.

847.00 1,016.40


Quantity:  





Lamello Clamex P-10 Connectors Pack 80  (Ref: 503672)

Lamello Clamex P-10 Connectors Pack 80

Key Features:

-Unique fitting to overcome many design problems
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special 'T' slot needs to be cut by Lamello Zeta biscuit jointer
-For 13mm panels size 52 x 19 x 9.7mm
-Made from fibreglass reinforced plastic for strength
-Suitable for solid wood, composite boards and other sheet materials

Part of the Lamello Zeta range of connectors, the P-10 is small for connecting 13mm panels. Designed to overcome many design assembly problems, this clamping connector is almost totally invisible with only a single 6mm hole showing on the finished joint. The P-10 is biscuit in shape with a special 'T' profile, one side is fitted with a pivot lever and two alignment studs, this can then be clamped to the other mating piece and locked. The lever is driven using a hexagon key though the 6mm hole. The pocket for the P-10 needs to be cut with a Lamello Zeta machine specially developed for this application, cutting the slot and adding the 'T' to the bottom using a unique vertical mechanical drive. Once cut, the connector simply slides in place, no screws or glue are needed. Made from fibreglass reinforced plastic for strength. Overall length is 52mm x width 19mm, each half has a depth of 9.7mm, it is 7mm in width (9.7mm o/a with 'T'). Supplied as a pack of 80, 300 or 1000. Requires P-10 drill guide.

99.28 119.14


Quantity:  





Lamello Clamex P-10 Connectors Pack 300  (Ref: 503673)

Lamello Clamex P-10 Connectors Pack 300

Key Features:

-Unique fitting to overcome many design problems
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special 'T' slot needs to be cut by Lamello Zeta biscuit jointer
-For 13mm panels size 52 x 19 x 9.7mm
-Made from fibreglass reinforced plastic for strength
-Suitable for solid wood, composite boards and other sheet materials

Part of the Lamello Zeta range of connectors, the P-10 is small for connecting 13mm panels. Designed to overcome many design assembly problems, this clamping connector is almost totally invisible with only a single 6mm hole showing on the finished joint. The P-10 is biscuit in shape with a special 'T' profile, one side is fitted with a pivot lever and two alignment studs, this can then be clamped to the other mating piece and locked. The lever is driven using a hexagon key though the 6mm hole. The pocket for the P-10 needs to be cut with a Lamello Zeta machine specially developed for this application, cutting the slot and adding the 'T' to the bottom using a unique vertical mechanical drive. Once cut, the connector simply slides in place, no screws or glue are needed. Made from fibreglass reinforced plastic for strength. Overall length is 52mm x width 19mm, each half has a depth of 9.7mm, it is 7mm in width (9.7mm o/a with 'T'). Supplied as a pack of 80, 300 or 1000. Requires P-10 drill guide.

327.81 393.37


Quantity:  





Lamello Clamex Covercaps - Black (Pkt 100)  (Ref: 210579)

Lamello Clamex Covercaps - Black (Pkt 100)

Key Features:

-Simple push fit covers
-Locate in the 6mm hole for the locking mechanism
-Available in packs of 100
-5 colours: white, pine, beech and brown

Simple push fit covers to help hide the 6mm hole that allows access the Clamex locking mechanism. Available in packs of 100 and a choice of 5 colours: white, pine, beech and brown.

5.50 6.60


Quantity:  





Lamello Clamex P-15 Connectors Pack 900  (Ref: 717380)

Lamello Clamex P-15 Connectors Pack 900

Key Features:

-Unique fitting to overcome many design problems
-Clamps, locking joint in place and is also detachable
-No glue or screws are required, simple assembly
-Only visible sign of joint is a single 6mm hole
-Special ‘T’ slot needs to be cut by Lamello Zeta biscuit jointer
-Joint angles 30 - 180°
-Made from fibre glass reinforced plastic for strength
-Suitable for solid wood, composite boards & other sheet materials

This is a truly amazing connector with a host of uses. Lamello have overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. The Clamex P is a biscuit shaped fitting with a ‘T’ profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the ‘T’ to the bottom using a unique vertical mechanical drive. Made from fibre glass reinforced plastic for strength (Tensile strength 160kg). Overall length is 66mm x width 29mm , each half has a depth of 14.5mm, it is 7mm in width (9.7mm o/a with ‘T’). Supplied as a pack of 80 or 300.

949.00 1,138.80


Quantity:  





Clamex P-10 Bisco Biscuit Pack 80  (Ref: 503848)

Clamex P-10 Bisco Biscuit Pack 80

Used as as an aligning or jointing biscuit, the 7mm thick flat Bisco is designed to work with the P-system groove produced by the Zeta or CNC system, providing alignment for assembly and greater shear strength, it can be glued in place if required. The Bisco is a flat 7mm plastic biscuit and is available in 2 sizes.Bisco P-15 is 65mm x 27mm (setting 15)

Bisco P-10 is 52mm x 19mm (setting 10)

16.97 20.36


Quantity:  





Clamex P-10 Bisco Biscuit Pack 300  (Ref: 503849)

Clamex P-10 Bisco Biscuit Pack 300

Used as as an aligning or jointing biscuit, the 7mm thick flat Bisco is designed to work with the P-system groove produced by the Zeta or CNC system, providing alignment for assembly and greater shear strength, it can be glued in place if required. The Bisco is a flat 7mm plastic biscuit and is available in 2 sizes.Bisco P-15 is 65mm x 27mm (setting 15)

Bisco P-10 is 52mm x 19mm (setting 10)

50.62 60.74


Quantity:  





Lamello Tenso P-14 Connector Pack 80  (Ref: 506102)

Lamello Tenso P-14 Connector Pack 80

Key Features

Self clamping connector with high clamp force
Invisible, does not require extra clamping
Especially suitable for 90° joints
Self anchors in the Zeta 'P' system groove
Push together for a tight connection
Use alone, with glue or other 'P' style connectors
Groove depth 14mm

This is a self clamping connector with high clamp force. It is part of the Lamello Zeta fitting range; working with the 'T' slot it self anchors in the 'P' system groove. This invisible fitting simply clamps together offering a tight connection and requires no further clamping, use alone with glue or with other 'P' style connectors. Especially suitable for 90° joints. Groove depth 14mm.

44.28 53.14


Quantity:  





Lamello Tenso P-14 Connector Pack 300  (Ref: 506103)

Lamello Tenso P-14 Connector Pack 300

Key Features

Self clamping connector with high clamp force
Invisible, does not require extra clamping
Especially suitable for 90° joints
Self anchors in the Zeta 'P' system groove
Push together for a tight connection
Use alone, with glue or other 'P' style connectors
Groove depth 14mm

This is a self clamping connector with high clamp force. It is part of the Lamello Zeta fitting range; working with the 'T' slot it self anchors in the 'P' system groove. This invisible fitting simply clamps together offering a tight connection and requires no further clamping, use alone with glue or with other 'P' style connectors. Especially suitable for 90° joints. Groove depth 14mm.

152.75 183.30


Quantity:  





Lamello Tenso P-14 Connector Pack 900  (Ref: 717365)

Lamello Tenso P-14 Connector Pack 900

Key Features

Self clamping connector with high clamp force
Invisible, does not require extra clamping
Especially suitable for 90° joints
Self anchors in the Zeta 'P' system groove
Push together for a tight connection
Use alone, with glue or other 'P' style connectors
Groove depth 14mm

This is a self clamping connector with high clamp force. It is part of the Lamello Zeta fitting range; working with the 'T' slot it self anchors in the 'P' system groove. This invisible fitting simply clamps together offering a tight connection and requires no further clamping, use alone with glue or with other 'P' style connectors. Especially suitable for 90° joints. Groove depth 14mm.

435.37 522.44


Quantity:  





Woodworking Tools >  Lamello Swiss Joinery >  Lamello Biscuit Jointing >  Lamello Biscuits & Accessories



Lamello Biscuits & Accessories
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Woodworking Tools Homepage
checkout
  View Basket
Woodworking Tools UK Delivery
Free UK Delivery