Ice Bear Japanese Laminated Chisels


Woodworking Tools >  Ice Bear Japanese Tools >  Ice Bear Japanese Laminated Chisels


Japanese Oire Nomi Chisel - 3mm  (Ref: 610370)

Japanese Oire Nomi Chisel - 3mm

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

34.50 41.40


Quantity:  





Japanese Oire Nomi Chisel - 6mm  (Ref: 610374)

Japanese Oire Nomi Chisel - 6mm

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

34.50 41.40


Quantity:  





Japanese Oire Nomi Chisel - 12mm  (Ref: 610365)

Japanese Oire Nomi Chisel - 12mm

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

35.97 43.16


Quantity:  





Japanese Oire Nomi Chisel - 18mm  (Ref: 610367)

Japanese Oire Nomi Chisel - 18mm

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

37.95 45.54


Quantity:  





Japanese Oire Nomi Chisel - 21mm  (Ref: 610368)

Japanese Oire Nomi Chisel - 21mm

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

35.65 42.78


Quantity:  





Japanese Oire Nomi Chisel - 24mm  (Ref: 610369)

Japanese Oire Nomi Chisel - 24mm

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

41.91 50.29


Quantity:  





Japanese Oire Nomi Chisels - Set of 4 (6,12,18,24mm)  (Ref: 610376)

Japanese Oire Nomi Chisels - Set of 4 (6,12,18,24mm)

Key Features:

-Edge hardened to over HRC 65
-White Paper #2 steel, laminated to softer backing
-Overall length approximately 230mm
-Longer shoulders and tangs
-Red oak handles with steel hoops
-Handle top mushroomed ready to go

Oire Nomi are the standard chisel used by Japanese carpenters and cabinet makers. These chisels have a blade length of approximately 62mm(2.1/2") with longer shoulders and tangs. They are well balanced and will take a blow from a hammer for heavier work as well as taking the thinnest of paring cuts for fine work. The overall length is approximately 230mm(9"). These professional grade chisels are made using high carbon steel (White Paper #2 steel) laminated to a softer low carbon backing steel. They are hardened to over HRC 65 and will hold a razor edge for far longer than an equivalent western chisel. They feature red oak handles, fitted with steel hoops finished with a mushroomed top ready to go.

122.31 146.77


Quantity:  





Oire Nomi Special Alloy Chisels - Set of 5  (Ref: 110029)

Oire Nomi Special Alloy Chisels - Set of 5

Key Features:

-Set of 5
-Special high carbon alloy steel similar to HSS
-Withstands continual use on particle board and knotty timbers
-Edge hardened to approximately HRC 68

These chisels, available only in a set of 5, are made from a special alloy steel, similar to high speed steel, laminated to a softer steel base. The harder edge steel, approximately HRC 68 will better withstand continual use on particle board and knotty timbers. Sharpening procedure is the same as for other Japanese chisels. Sizes are 9, 15, 24, 30 and 36mm.

205.78 246.94


Quantity:  





Japanese Umeki Nomi Dovetail Chisel - 12mm  (Ref: 384007)

Japanese Umeki Nomi Dovetail Chisel - 12mm

Key Features:

-Used to clean sharp corners when cutting fine joints
-Almost triangular cross-section
-Perfect profile for dovetail work
-Classic tang and ferrule
-White Paper steel #2 laminated to wrought iron backing
-White oak handles with iron hoop for use with hammer
-Edge hardened to over HRC 65

Used mainly to clean up sharp corners when cutting fine joints. The Umeki Nomi is also known as the Japanese dovetail chisel which describes its usage perfectly. The bevels along the sides rise steeply almost from the edges to a point in the centre, giving the chisel an almost triangular cross section, the perfect profile for dovetail work. Made with the classic tang and ferrule, the edge steel used is White Paper #2 hardened to over HRC 65. The white oak handles are fitted with an iron hoop so can be struck with a hammer when extra force is needed, 230mm(9") long overall.

50.28 60.34


Quantity:  





Woodworking Tools >  Ice Bear Japanese Tools >  Ice Bear Japanese Laminated Chisels



Ice Bear Japanese Laminated Chisels
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Woodworking Tools Homepage
checkout
  View Basket
Woodworking Tools UK Delivery
Free UK Delivery